new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 20

Modeling Doppler Shifts in Radial-Velocity Data with Deep Learning toward Earth-mass Exoplanet Detection

Detecting the tiny Doppler shifts induced by Earth-mass planets in stellar radial-velocity measurements remains extremely challenging due to stellar activity. Many deep-learning methods performing well on simulated data remain difficult to apply reliably on real stellar spectra. The aim of this work is to develop a deep-learning framework that generalizes to real, unseen spectra and improves the detectability of Earth-mass planets in radial-velocity data. We train artificial neural networks on HARPS-N solar spectra with injected planetary signals, using physics-motivated spectral representations based on flux and line-formation temperature, together with their velocity gradients. Two training strategies are explored: hold-out testing and cross-validation. Model robustness is enhanced through genetic-algorithm-based hyperparameter optimization, and predictive uncertainty is quantified using Monte Carlo dropout. Our most precise neural network model reliably retrieves, under the cross-validation strategy, the amplitudes, phases, and orbital periods of planetary signals with amplitudes greater than or equal to 25 cm/s and periods between 10 and 550 days. In addition, in all cases tested here, the successfully recovered signals correspond to the most significant peaks in the periodograms of the Doppler-shift predictions. Temperature-based spectral-shell representations consistently outperform flux-based shells. We also release doppleriann, a Python package implementing the proposed framework. Our results demonstrate that combining physically motivated spectral representations with deep learning provides a promising pathway toward the detection of Earth-mass planets in radial-velocity data from real observations, supported by a modeling framework that is both physically grounded and statistically rigorous, incorporating uncertainty quantification and optimized training strategies.

ZipGAN: Super-Resolution-based Generative Adversarial Network Framework for Data Compression of Direct Numerical Simulations

The advancement of high-performance computing has enabled the generation of large direct numerical simulation (DNS) datasets of turbulent flows, driving the need for efficient compression/decompression techniques that reduce storage demands while maintaining fidelity. Traditional methods, such as the discrete wavelet transform, cannot achieve compression ratios of 8 or higher for complex turbulent flows without introducing significant encoding/decoding errors. On the other hand, a super-resolution-based generative adversarial network (SR-GAN), called ZipGAN, can accurately reconstruct fine-scale features, preserving velocity gradients and structural details, even at a compression ratio of 512, thanks to the more efficient representation of the data in compact latent space. Additional benefits are ascribed to adversarial training. The high GAN training time is significantly reduced with a progressive transfer learning approach and, once trained, they can be applied independently of the Reynolds number. It is demonstrated that ZipGAN can enhance dataset temporal resolution without additional simulation overhead by generating high-quality intermediate fields from compressed snapshots. The ZipGAN discriminator can reliably evaluate the quality of decoded fields, ensuring fidelity even in the absence of original DNS fields. Hence, ZipGAN compression/decompression method presents a highly efficient and scalable alternative for large-scale DNS storage and transfer, offering substantial advantages over the DWT methods in terms of compression efficiency, reconstruction fidelity, and temporal resolution enhancement.

  • 8 authors
·
Dec 18, 2024

PyCC: A Reference Quantum Chemistry Python Package for Education, Validation, and Rapid Prototyping

PyCC is a Python-based quantum chemistry package that emphasizes coupled cluster and related methods. Developed over the last five years, PyCC's purpose is to provide a clear reference implementation that will serve as a validation suite for production code, a platform for rapid prototyping and testing of new methods, and an educational resource for newcomers to the field. The package covers both closed- and open-shell single-determinant references in spatial- and spin-orbital formulations for the coupled cluster hierarchy through triples-including methods such as CC3, as well as for MP2 and CI methods. PyCC provides a broad range of molecular properties such as analytic first and second energy derivatives including gradients, Hessians, polarizabilities and atomic polar tensors, as well as non-energy-derivative properties, such as velocity-gauge atomic polar tensors and diagonal Born-Oppenheimer corrections, plus dynamic linear response functions, and excitation energies. The package includes a number of unique capabilities, such as real-time CC propagation (up through CC3), atomic axial tensors for simulating vibrational circular dichroism spectra at the MP2 and CI levels, and local correlation methods including perturbation-aware correlation domains. The code is designed around a shared Wavefunction base and a method-agnostic derivative layer that enables a new method to inherit the full property set once it supplies its reduced densities and their first-order responses. PyCC is fully open source and available on GitHub under the BSD 3-clause license.

  • 9 authors
·
Oct 1

LessMimic: Long-Horizon Humanoid Interaction with Unified Distance Field Representations

Humanoid robots that autonomously interact with physical environments over extended horizons represent a central goal of embodied intelligence. Existing approaches rely on reference motions or task-specific rewards, tightly coupling policies to particular object geometries and precluding multi-skill generalization within a single framework. A unified interaction representation enabling reference-free inference, geometric generalization, and long-horizon skill composition within one policy remains an open challenge. Here we show that Distance Field (DF) provides such a representation: LessMimic conditions a single whole-body policy on DF-derived geometric cues--surface distances, gradients, and velocity decompositions--removing the need for motion references, with interaction latents encoded via a Variational Auto-Encoder (VAE) and post-trained using Adversarial Interaction Priors (AIP) under Reinforcement Learning (RL). Through DAgger-style distillation that aligns DF latents with egocentric depth features, LessMimic further transfers seamlessly to vision-only deployment without motion capture (MoCap) infrastructure. A single LessMimic policy achieves 80--100% success across object scales from 0.4x to 1.6x on PickUp and SitStand where baselines degrade sharply, attains 62.1% success on 5 task instances trajectories, and remains viable up to 40 sequentially composed tasks. By grounding interaction in local geometry rather than demonstrations, LessMimic offers a scalable path toward humanoid robots that generalize, compose skills, and recover from failures in unstructured environments.

  • 6 authors
·
Feb 24

Normal-Field Evolution and the Breakdown of Classical Tearing in Current Sheets

Classical resistive tearing theory assumes a prescribed current-sheet equilibrium, but a finite normal magnetic field can evolve the background on the tearing timescale. For a transversely pressure-balanced Harris profile of initial half-thickness a and asymptotic reconnecting-field magnitude B_0, threaded by uniform B_n (ξ=B_n/B_0), we derive an exact evolution in ideal magnetohydrodynamics: counter-propagating Alfvenic fronts broaden the neutral layer and generate a central sheet-parallel flow with shear at its flanks. Inner-layer estimates recover ξ_{crit}sim S^{-3/4} for breakdown of the classical resistive balance, where S is the Lundquist number based on a. Numerical frozen-profile calculations show loss of central resistive dominance and decreasing tearing growth as the neutral layer expands. Eigenfunction comparisons at fixed wavenumber and predominantly Doppler-shifted propagation support a normal-field-modified continuation of classical tearing. The normal field supplies no net perturbation energy. Energy extraction from the reconnecting-field gradient weakens as the sheet broadens. The velocity-gradient contribution becomes comparable when the neutral-layer width approaches the initial sheet thickness, without reversing the decline in growth. For S=10^6, Pr_m=0, and ξ=10^{-4}, the maximum growth rate falls by a factor of about ten from its initial value at neutral-layer half-width wsimeq1.59a, where the growth and broadening times become equal. Only about 0.18 additional upper-envelope e-folds are estimated between this crossing and w/a=2, where the growth rate is about 25 times smaller than its initial value. These results support dynamical suppression of further linear amplification over the sampled evolution, even though the instantaneous spectrum remains unstable.

  • 2 authors
·
Sep 29

EWOCS-XI: Anisotropic expansion and shear in the cluster Westerlund 1. A 2D kinematic analysis with Gaia DR3

Westerlund 1 (Wd1) is one of the Milky Way's most massive young clusters, in which heavy extinction and field contamination have historically hampered its kinematic characterization. We aim to assess Wd1's internal kinematics, dynamical state, and formation scenario. Using a robust 5D clustering approach, we identified 559 bona fide members. We modeled their proper motions via a 2D first-order Taylor expansion to derive the velocity gradient tensor, mapping expansion, rotation, and shear. Restricting the kinematic analysis to 524 stars with proper motion uncertainties <0.5~mas,yr^{-1}, we find at least 103 gravitationally unbound members, including 14 walkaway stars. The 2D analysis reveals a statistically significant divergence (>4σ) highlighting preferred expansion along the Galactic latitude (position angle 164^circpm10.1^circ). A detected cross-gradient (partial v_b / partial l = -0.41 pm 0.08 km s^{-1} pc^{-1}) provides a clear signature of shear on the plane of the sky. Wd1 does not behave as a single cohesive population, but comprises two decoupled subsystems: a stable, bound core in dynamical equilibrium and an escaping, unbound envelope. This prominent anisotropic expansion perpendicular to the Galactic plane has a kinematic timescale (Δt_{kin} = 2.08 pm 0.44 Myr) matching the independent orbital mid-plane crossing time (Δt_{orbit} = 2.10 pm 0.05 Myr). This temporal alignment indicates the expansion onset coincided with Wd1's Galactic disk passage, triggered either by internal dynamics (e.g., early supernova feedback) or external tidal perturbations. Finally, the robust unbound population demonstrates that active cluster dissolution is underway, driven by discrete dynamical ejection events rather than long-term stellar evaporation.

  • 17 authors
·
Oct 7

On the transmission of floating-point perturbations in flow-dependent filter-width formulations in Large-Eddy Simulation

Heterogeneous high--performance computing architectures expose numerical algorithms to perturbations arising from the non--associativity of floating--point arithmetic. In Large--Eddy Simulation (LES), similar numerical effects may become relevant when they affect the filter--width entering the subgrid scale (SGS) model. This work investigates this mechanism for the least--squares (LSQ) based filter--width formulation, focusing on how floating--point effects are generated, transmitted, and coupled with the resolved flow. We show that, for fixed resolved kinematics, the LSQ filter--width is logarithmically non-expansive but not strictly contractive with respect to perturbations of the mesh metrics. Consequently, small disturbances may be transmitted with little attenuation through strongly directional filter-width responses. To mitigate this sensitivity, we introduce a scalar max--min compression of the directional mesh scales together with a bounded modulation based on the resolved velocity gradient. The resulting formulation reroutes floating--point perturbations through the filter-width operator, improving robustness while preserving the flow--dependent character of the original LSQ construction. The framework is assessed on heterogeneous CPU and GPU architectures for flow past a circular cylinder at Re=3900 and the Taylor--Green vortex at Re=1600. In the former, nearly one--to--one transmission of relative metric disturbances can become relevant when the transmitted perturbations interact with shear-layer transition. By contrast, on orthogonal Taylor--Green vortex grids, the accumulation pathway is structurally absent and no comparable macroscopic response develops. These results suggest floating--point sensitivity matters for LES filter--width formulations in heterogeneous computing environments.

  • 4 authors
·
Sep 30

Improving Classifier-Free Guidance of Flow Matching via Manifold Projection

Classifier-free guidance (CFG) is a widely used technique for controllable generation in diffusion and flow-based models. Despite its empirical success, CFG relies on a heuristic linear extrapolation that is often sensitive to the guidance scale. In this work, we provide a principled interpretation of CFG through the lens of optimization. We demonstrate that the velocity field in flow matching corresponds to the gradient of a sequence of smoothed distance functions, which guides latent variables toward the scaled target image set. This perspective reveals that the standard CFG formulation is an approximation of this gradient, where the prediction gap, the discrepancy between conditional and unconditional outputs, governs guidance sensitivity. Leveraging this insight, we reformulate the CFG sampling as a homotopy optimization with a manifold constraint. This formulation necessitates a manifold projection step, which we implement via an incremental gradient descent scheme during sampling. To improve computational efficiency and stability, we further enhance this iterative process with Anderson Acceleration without requiring additional model evaluations. Our proposed methods are training-free and consistently refine generation fidelity, prompt alignment, and robustness to the guidance scale. We validate their effectiveness across diverse benchmarks, demonstrating significant improvements on large-scale models such as DiT-XL-2-256, Flux, and Stable Diffusion 3.5.

  • 4 authors
·
Jan 29

Physics-informed coherent motions to predict Lagrangian trajectories

Accurate prediction of Lagrangian trajectories in turbulent flow remains challenging due to limited temporal information in transport functions. This paper shows that surrounding coherent motions sharing the same dynamics carry enough information to provide highly probable trajectories even from sparse temporal observations. The proposed coherent predictor builds on Lagrangian coherent structures (LCSs), the advective transport barriers that govern the cohesive motion of neighbouring particles. Coherent trajectories are quantified using a local segmentation with the finite-time Lyapunov exponents (FTLE). The coherent predictor incorporates information from the particle's position history and neighbouring coherent velocity and acceleration into a novel cost function to predict its trajectory. The proposed cost function follows a physics-informed approach where the position history acts as a data fidelity term and the coherent velocity and acceleration act as physics-based regularisation constraints. We assess our proposed approach using both three-dimensional (3D) synthetic and experimental data of the wake behind a smooth cylinder and two-dimensional (2D) homogeneous isotropic turbulent (HIT) flow. The coherent predictor is deemed generic due to its consistent behaviour regardless of flow dimensions, Reynolds number, and flow topology. Our results show that the optimal cost function parameters can be modelled from the measurement uncertainties, giving lower prediction error and uncertainty than current methods. We see direct signatures of flow topology on the prediction error map, including the cylinder leading edge boundary layer, the sideward shear layers, and the vortex formation structures. These topologies are marked by high Lagrangian gradients and 3D directional motions.

  • 2 authors
·
May 5

Synthetic Lagrangian Turbulence by Generative Diffusion Models

Lagrangian turbulence lies at the core of numerous applied and fundamental problems related to the physics of dispersion and mixing in engineering, bio-fluids, atmosphere, oceans, and astrophysics. Despite exceptional theoretical, numerical, and experimental efforts conducted over the past thirty years, no existing models are capable of faithfully reproducing statistical and topological properties exhibited by particle trajectories in turbulence. We propose a machine learning approach, based on a state-of-the-art diffusion model, to generate single-particle trajectories in three-dimensional turbulence at high Reynolds numbers, thereby bypassing the need for direct numerical simulations or experiments to obtain reliable Lagrangian data. Our model demonstrates the ability to reproduce most statistical benchmarks across time scales, including the fat-tail distribution for velocity increments, the anomalous power law, and the increased intermittency around the dissipative scale. Slight deviations are observed below the dissipative scale, particularly in the acceleration and flatness statistics. Surprisingly, the model exhibits strong generalizability for extreme events, producing events of higher intensity and rarity that still match the realistic statistics. This paves the way for producing synthetic high-quality datasets for pre-training various downstream applications of Lagrangian turbulence.

  • 5 authors
·
Apr 27, 2024

Coherent Structures Governing Transport at Turbulent Interfaces

In an experiment on a turbulent jet, we detect interfacial turbulent layers in a frame that moves, on average, along with the \tnti. This significantly prolongs the observation time of scalar and velocity structures and enables the measurement of two types of Lagrangian coherent structures. One structure, the finite-time Lyapunov field (FTLE), quantifies advective transport barriers of fluid parcels while the other structure highlights barriers of diffusive momentum transport. These two complementary structures depend on large-scale and small-scale motion and are therefore associated with the growth of the turbulent region through engulfment or nibbling, respectively. We detect the \tnti\ from cluster analysis, where we divide the measured scalar field into four clusters. Not only the \tnti\ can be found this way, but also the next, internal, turbulent-turbulent interface. Conditional averages show that these interfaces are correlated with barriers of advective and diffusive transport when the Lagrangian integration time is smaller than the integral time scale. Diffusive structures decorrelate faster since they have a smaller timescale. Conditional averages of these structures at internal turbulent-turbulent interfaces show the same pattern with a more pronounced jump at the interface indicative of a shear layer. This is quite an unexpected outcome, as the internal interface is now defined not by the presence or absence of vorticity, but by conditional vorticity corresponding to two uniform concentration zones. The long-time diffusive momentum flux along Lagrangian paths represents the growth of the turbulent flow into the irrotational domain, a direct demonstration of nibbling. The diffusive flux parallel to the \tnti\ appears to be concentrated in a diffusive superlayer whose width is comparable with the Taylor microscale, which is relatively invariant in time.

  • 5 authors
·
Dec 17, 2024

Fast and Faithful: Principled Conditional Flow Matching for Inverse Problems

Flow matching approaches to imaging inverse problems commonly incorporate measurements in two ways. Conditioning-based approaches supply measurement-derived information as a network input, often through concatenation, while inference-guided approaches combine an unconditional velocity field with a separate data-consistency update. In these common formulations, the forward model is not explicitly enforced within the learned conditional velocity field. We propose a principled parametrization of the measurement-conditional velocity field to solve inverse problems. Under linear interpolation, we express the conditional velocity v(x_t,t,y) in terms of the posterior mean E[x_1 | x_t,y], and characterize that mean as the unique minimizer of a variational objective whose data-consistency term is explicit. We further prove that the velocity field defines a probability flow from the source distribution to the measurement-conditioned posterior. Splitting the variational objective yields a conditional velocity parameterization with operator-dependent data-consistency updates, which we train end-to-end under the flow-matching objective, with no additional guidance at inference. Our method achieves state-of-the-art PSNR with 50times fewer function evaluations than the strongest flow baseline. Varying the sampling steps provides test-time control over the distortion-perception trade-off without retraining.

  • 4 authors
·
Sep 10

An Exactly Solvable Ekman Layer with a Fractional-Order Stress Closure

The classical theory of the wind-driven surface layer of a rotating ocean closes the momentum balance with a local flux-gradient law, in which the turbulent stress at a given depth is proportional to the shear at that depth. It predicts a surface current deflected forty-five degrees from the wind, which exceeds most direct measurements. This study asks what follows when locality is relaxed. Beginning from the exact integral relation between turbulent stress and mean shear, and requiring the memory kernel to carry no preferred vertical scale, we obtain a power-law kernel and therefore a stress law of fractional order. The resulting equation cannot be posed on the velocity, because the fractional derivative of a bounded profile vanishes at the surface, so the wind stress cannot be applied, while the alternative definition of the derivative leaves the surface current unbounded. Posed on the stress instead, the problem is solvable in closed form in Mittag-Leffler functions at every order between zero and one. The surface deflection then depends on the closure order alone and is smaller than forty-five degrees throughout, whereas the depth-integrated transport stays exactly normal to the wind, because that constraint follows from the momentum balance and not from the closure. The far field decays as a power law rather than exponentially, and its amplitude vanishes in the local limit, so that limit is singular. Under a suddenly applied stress the surface transient decays algebraically. Three independent algorithms agree closely, and no observational or model data are used.

  • 6 authors
·
Sep 18

Diffusion limits of cyclic finite-velocity random motions along vector fields

We investigate diffusion approximations for a class of multivariate inhomogeneous finite-velocity random motions motivated by models of active particles. A particle alternates cyclically among prescribed velocity fields V_1,dots,V_p with random run times and evolves according to either a flight dynamics, consisting of piecewise-linear motion, or a gliding dynamics, in which the particle follows the corresponding velocity flow. Under a Kac-type scaling that couples vanishing run times with diverging particle speed, we prove weak convergence of both processes to multidimensional diffusions. It turns out that the order of successive cyclic motions affects the diffusion limit. In addition to the second-order term generated by fluctuations of the random run times, the limiting drift contains directional derivatives DV_i[V_j] of the underlying vector fields. In Stratonovich form, part of this drift is expressed through their Lie brackets [V_i,V_j]. Thus, the generic non-commutativity of the microscopic motions survives the diffusive scaling and generates a macroscopic drift which depends on the cyclic order. The limiting drift also distinguishes the flight and gliding dynamics, despite their being driven by the same vector fields and run times. Several examples, including run-and-reverse motion and cyclic dynamics generated by multiple vector fields, illustrate how the cyclic switching protocol and the geometry of the underlying velocity fields shape the limiting diffusions.

  • 3 authors
·
Aug 30 1

Learning to evolve by matching velocities

Learning the continuous-time evolution of nonlinear dynamical systems relies on trajectory-based objectives, which require simulating the learned dynamics during training and backpropagating through the numerical scheme, at a cost that grows with the rollout horizon. We show that trajectory-based objectives degenerate as the rollout horizon increases, hindering gradient-based optimization, and that the numerical scheme biases the learned dynamics by constraining the spectrum of the learned Jacobian to its absolute stability region. To overcome these limitations, we introduce Velocity Matching (VM), a simulation-free objective that relies on piecewise-linear interpolation and stochastic collocation, and approximates the velocity population risk to second order in the sampling step. We develop a theoretical framework for velocity-based learning, introducing stability estimates that control trajectory errors in terms of velocity errors, which enable us to establish universal and continuous-time approximation results when the learned velocity field is parameterized by deep neural networks. Building on a bias-variance decomposition of the VM objective, we show that its higher-order approximation of the velocity population risk yields a consistent minimizer; that it relates to the residual of an A-stable continuous-stage Runge-Kutta scheme, thus connecting VM to implicit integration without requiring any implicit solve; and that it implicitly matches the action of the learned Jacobian to that of the true one along the observed trajectories, without requiring access to the underlying velocity field or its Jacobian. Numerical experiments on nonlinear ordinary differential equations and semi-discretized time-dependent partial differential equations show that VM improves accuracy over trajectory-based objectives, while avoiding both the cost of simulation and the instabilities of long rollouts.

Stochastic Interpolants: A Unifying Framework for Flows and Diffusions

A class of generative models that unifies flow-based and diffusion-based methods is introduced. These models extend the framework proposed in Albergo & Vanden-Eijnden (2023), enabling the use of a broad class of continuous-time stochastic processes called `stochastic interpolants' to bridge any two arbitrary probability density functions exactly in finite time. These interpolants are built by combining data from the two prescribed densities with an additional latent variable that shapes the bridge in a flexible way. The time-dependent probability density function of the stochastic interpolant is shown to satisfy a first-order transport equation as well as a family of forward and backward Fokker-Planck equations with tunable diffusion coefficient. Upon consideration of the time evolution of an individual sample, this viewpoint immediately leads to both deterministic and stochastic generative models based on probability flow equations or stochastic differential equations with an adjustable level of noise. The drift coefficients entering these models are time-dependent velocity fields characterized as the unique minimizers of simple quadratic objective functions, one of which is a new objective for the score of the interpolant density. We show that minimization of these quadratic objectives leads to control of the likelihood for generative models built upon stochastic dynamics, while likelihood control for deterministic dynamics is more stringent. We also discuss connections with other methods such as score-based diffusion models, stochastic localization processes, probabilistic denoising techniques, and rectifying flows. In addition, we demonstrate that stochastic interpolants recover the Schr\"odinger bridge between the two target densities when explicitly optimizing over the interpolant. Finally, algorithmic aspects are discussed and the approach is illustrated on numerical examples.

  • 3 authors
·
Mar 15, 2023

Few-step Flow for 3D Generation via Marginal-Data Transport Distillation

Flow-based 3D generation models typically require dozens of sampling steps during inference. Though few-step distillation methods, particularly Consistency Models (CMs), have achieved substantial advancements in accelerating 2D diffusion models, they remain under-explored for more complex 3D generation tasks. In this study, we propose a novel framework, MDT-dist, for few-step 3D flow distillation. Our approach is built upon a primary objective: distilling the pretrained model to learn the Marginal-Data Transport. Directly learning this objective needs to integrate the velocity fields, while this integral is intractable to be implemented. Therefore, we propose two optimizable objectives, Velocity Matching (VM) and Velocity Distillation (VD), to equivalently convert the optimization target from the transport level to the velocity and the distribution level respectively. Velocity Matching (VM) learns to stably match the velocity fields between the student and the teacher, but inevitably provides biased gradient estimates. Velocity Distillation (VD) further enhances the optimization process by leveraging the learned velocity fields to perform probability density distillation. When evaluated on the pioneer 3D generation framework TRELLIS, our method reduces sampling steps of each flow transformer from 25 to 1 or 2, achieving 0.68s (1 step x 2) and 0.94s (2 steps x 2) latency with 9.0x and 6.5x speedup on A800, while preserving high visual and geometric fidelity. Extensive experiments demonstrate that our method significantly outperforms existing CM distillation methods, and enables TRELLIS to achieve superior performance in few-step 3D generation.

  • 8 authors
·
Sep 4, 2025 2

FlowAWR: Online Adaptive Flow Reinforcement via Advantage-Weighted Rectification

Aligning generative flow models on continuous spaces via online reinforcement learning is constrained by intractable trajectory likelihoods. Existing density-approximated policy gradient methods rely on stochastic SDE samplers to construct tractable transition kernels, which introduce training-inference inconsistencies and necessitates Classifier-Free Guidance (CFG). While implicit frameworks such as DiffusionNFT directly optimize forward-process velocity fields, its heuristic fixed-magnitude corrections prevent optimization strength from relative intra-group quality. We propose Flow Advantage-Weighted Rectification (FlowAWR), a paradigm that recasts continuous generative policy optimization as supervised regression toward a theoretically optimal velocity field. Starting from the optimal policy of a KL-constrained reward maximization, FlowAWR derives the optimal velocity field that admits a magnitude-aware, advantage-weighted rectification form, yielding SDE-free optimization and CFG-free generation. In comparative evaluations on SD3.5-Medium, FlowAWR achieves improved alignment performance alongside a 2times to 5times convergence acceleration over DiffusionNFT (e.g., reaching a 24.12 PickScore in 1.2k steps, versus 23.82 in 2.0k steps for DiffusionNFT and 23.50 in >4k steps for FlowGRPO). Under multi-reward constraints, FlowAWR sustains generation quality, satisfying structural rules while maintaining stable out-of-domain performance.

  • 7 authors
·
Jun 28

Free Lunch for Stabilizing Rectified Flow Inversion

Rectified-Flow (RF)-based generative models have recently emerged as strong alternatives to traditional diffusion models, demonstrating state-of-the-art performance across various tasks. By learning a continuous velocity field that transforms simple noise into complex data, RF-based models not only enable high-quality generation, but also support training-free inversion, which facilitates downstream tasks such as reconstruction and editing. However, existing inversion methods, such as vanilla RF-based inversion, suffer from approximation errors that accumulate across timesteps, leading to unstable velocity fields and degraded reconstruction and editing quality. To address this challenge, we propose Proximal-Mean Inversion (PMI), a training-free gradient correction method that stabilizes the velocity field by guiding it toward a running average of past velocities, constrained within a theoretically derived spherical Gaussian. Furthermore, we introduce mimic-CFG, a lightweight velocity correction scheme for editing tasks, which interpolates between the current velocity and its projection onto the historical average, balancing editing effectiveness and structural consistency. Extensive experiments on PIE-Bench demonstrate that our methods significantly improve inversion stability, image reconstruction quality, and editing fidelity, while reducing the required number of neural function evaluations. Our approach achieves state-of-the-art performance on the PIE-Bench with enhanced efficiency and theoretical soundness.

  • 3 authors
·
Feb 12

Generalization techniques of neural networks for fluid flow estimation

We demonstrate several techniques to encourage practical uses of neural networks for fluid flow estimation. In the present paper, three perspectives which are remaining challenges for applications of machine learning to fluid dynamics are considered: 1. interpretability of machine-learned results, 2. bulking out of training data, and 3. generalizability of neural networks. For the interpretability, we first demonstrate two methods to observe the internal procedure of neural networks, i.e., visualization of hidden layers and application of gradient-weighted class activation mapping (Grad-CAM), applied to canonical fluid flow estimation problems -- (1) drag coefficient estimation of a cylinder wake and (2) velocity estimation from particle images. It is exemplified that both approaches can successfully tell us evidences of the great capability of machine learning-based estimations. We then utilize some techniques to bulk out training data for super-resolution analysis and temporal prediction for cylinder wake and NOAA sea surface temperature data to demonstrate that sufficient training of neural networks with limited amount of training data can be achieved for fluid flow problems. The generalizability of machine learning model is also discussed by accounting for the perspectives of inter/extrapolation of training data, considering super-resolution of wakes behind two parallel cylinders. We find that various flow patterns generated by complex interaction between two cylinders can be reconstructed well, even for the test configurations regarding the distance factor. The present paper can be a significant step toward practical uses of neural networks for both laminar and turbulent flow problems.

  • 4 authors
·
Nov 24, 2020

Understanding and mitigating gradient pathologies in physics-informed neural networks

The widespread use of neural networks across different scientific domains often involves constraining them to satisfy certain symmetries, conservation laws, or other domain knowledge. Such constraints are often imposed as soft penalties during model training and effectively act as domain-specific regularizers of the empirical risk loss. Physics-informed neural networks is an example of this philosophy in which the outputs of deep neural networks are constrained to approximately satisfy a given set of partial differential equations. In this work we review recent advances in scientific machine learning with a specific focus on the effectiveness of physics-informed neural networks in predicting outcomes of physical systems and discovering hidden physics from noisy data. We will also identify and analyze a fundamental mode of failure of such approaches that is related to numerical stiffness leading to unbalanced back-propagated gradients during model training. To address this limitation we present a learning rate annealing algorithm that utilizes gradient statistics during model training to balance the interplay between different terms in composite loss functions. We also propose a novel neural network architecture that is more resilient to such gradient pathologies. Taken together, our developments provide new insights into the training of constrained neural networks and consistently improve the predictive accuracy of physics-informed neural networks by a factor of 50-100x across a range of problems in computational physics. All code and data accompanying this manuscript are publicly available at https://github.com/PredictiveIntelligenceLab/GradientPathologiesPINNs.

  • 3 authors
·
Jan 12, 2020

Modeling transport in weakly collisional plasmas using thermodynamic forcing

How momentum, energy, and magnetic fields are transported in the presence of macroscopic gradients is a fundamental question in plasma physics. Answering this question is especially challenging for weakly collisional, magnetized plasmas, where macroscopic gradients influence the plasma's microphysical structure. In this paper, we introduce thermodynamic forcing, a new method for systematically modeling how macroscopic gradients in magnetized or unmagnetized plasmas shape the distribution functions of constituent particles. In this method, we propose to apply an anomalous force to those particles inducing the anisotropy that would naturally emerge due to macroscopic gradients in weakly collisional plasmas. We implement thermodynamic forcing in particle-in-cell (TF-PIC) simulations using a modified Vay particle pusher and validate it against analytic solutions of the equations of motion. We then carry out a series of simulations of electron-proton plasmas with periodic boundary conditions using TF-PIC. First, we confirm that the properties of two electron-scale kinetic instabilities -- one driven by a temperature gradient and the other by pressure anisotropy -- are consistent with previous results. Then, we demonstrate that in the presence of multiple macroscopic gradients, the saturated state can differ significantly from current expectations. This work enables, for the first time, systematic and self-consistent transport modeling in weakly collisional plasmas, with broad applications in astrophysics, laser-plasma physics, and inertial confinement fusion.

  • 2 authors
·
Apr 18, 2025

On discretisation drift and smoothness regularisation in neural network training

The deep learning recipe of casting real-world problems as mathematical optimisation and tackling the optimisation by training deep neural networks using gradient-based optimisation has undoubtedly proven to be a fruitful one. The understanding behind why deep learning works, however, has lagged behind its practical significance. We aim to make steps towards an improved understanding of deep learning with a focus on optimisation and model regularisation. We start by investigating gradient descent (GD), a discrete-time algorithm at the basis of most popular deep learning optimisation algorithms. Understanding the dynamics of GD has been hindered by the presence of discretisation drift, the numerical integration error between GD and its often studied continuous-time counterpart, the negative gradient flow (NGF). To add to the toolkit available to study GD, we derive novel continuous-time flows that account for discretisation drift. Unlike the NGF, these new flows can be used to describe learning rate specific behaviours of GD, such as training instabilities observed in supervised learning and two-player games. We then translate insights from continuous time into mitigation strategies for unstable GD dynamics, by constructing novel learning rate schedules and regularisers that do not require additional hyperparameters. Like optimisation, smoothness regularisation is another pillar of deep learning's success with wide use in supervised learning and generative modelling. Despite their individual significance, the interactions between smoothness regularisation and optimisation have yet to be explored. We find that smoothness regularisation affects optimisation across multiple deep learning domains, and that incorporating smoothness regularisation in reinforcement learning leads to a performance boost that can be recovered using adaptions to optimisation methods.

  • 1 authors
·
Oct 21, 2023

Reconstructions of electron-temperature profiles from EUROfusion Pedestal Database using turbulence models and machine learning

This study uses plasma-profile data from the EUROfusion pedestal database, focusing on the electron-temperature and electron-density profiles in the edge region of H-mode ELMy JET ITER-Like-Wall (ILW) pulses. We make systematic predictions of the electron-temperature pedestal, using the density profiles and engineering parameters of the pulses as inputs. We first present a machine-learning algorithm that, given more inputs than theory-based modelling and 80\% of the database as training data, can reconstruct the remaining 20\% of temperature profiles within 20\% of the experimental values, including accurate estimates of the pedestal width and location. The most important engineering parameters for these predictions are magnetic field strength, particle fuelling rate, plasma current, and strike-point configuration. This confirms the potential of accurate pedestal prediction using large databases. Next, we take a simple theoretical approach assuming a local power-law relationship between the gradients of density (R/L_{n_e}) and temperature (R/L_{T_e}): R/L_{T_e}=Aleft(R/L_{n_e}right)^α with αapprox 0.4 fits well in the steep-gradient region. When A and α are fit independently for each pedestal, a one-to-one correlation emerges, also valid for JET-C data. For α= 1, A equiv η_e, a known control parameter for turbulence in slab-ETG theory. Measured values of η_e in the steep-gradient region lie well above the slab-ETG stability threshold, suggesting a nonlinear threshold shift or a supercritical turbulent state. Finally, we test heat-flux scalings motivated by gyrokinetic simulations, and we provide best-fit parameters for reconstructing JET-ILW pedestals. These models require additional experimental inputs to reach the accuracy of the machine-learning reconstructions.

  • 6 authors
·
Apr 24, 2025

diffGrad: An Optimization Method for Convolutional Neural Networks

Stochastic Gradient Decent (SGD) is one of the core techniques behind the success of deep neural networks. The gradient provides information on the direction in which a function has the steepest rate of change. The main problem with basic SGD is to change by equal sized steps for all parameters, irrespective of gradient behavior. Hence, an efficient way of deep network optimization is to make adaptive step sizes for each parameter. Recently, several attempts have been made to improve gradient descent methods such as AdaGrad, AdaDelta, RMSProp and Adam. These methods rely on the square roots of exponential moving averages of squared past gradients. Thus, these methods do not take advantage of local change in gradients. In this paper, a novel optimizer is proposed based on the difference between the present and the immediate past gradient (i.e., diffGrad). In the proposed diffGrad optimization technique, the step size is adjusted for each parameter in such a way that it should have a larger step size for faster gradient changing parameters and a lower step size for lower gradient changing parameters. The convergence analysis is done using the regret bound approach of online learning framework. Rigorous analysis is made in this paper over three synthetic complex non-convex functions. The image categorization experiments are also conducted over the CIFAR10 and CIFAR100 datasets to observe the performance of diffGrad with respect to the state-of-the-art optimizers such as SGDM, AdaGrad, AdaDelta, RMSProp, AMSGrad, and Adam. The residual unit (ResNet) based Convolutional Neural Networks (CNN) architecture is used in the experiments. The experiments show that diffGrad outperforms other optimizers. Also, we show that diffGrad performs uniformly well for training CNN using different activation functions. The source code is made publicly available at https://github.com/shivram1987/diffGrad.

  • 6 authors
·
Sep 12, 2019 1

On gauge freedom, conservativity and intrinsic dimensionality estimation in diffusion models

Diffusion models are generative models that have recently demonstrated impressive performances in terms of sampling quality and density estimation in high dimensions. They rely on a forward continuous diffusion process and a backward continuous denoising process, which can be described by a time-dependent vector field and is used as a generative model. In the original formulation of the diffusion model, this vector field is assumed to be the score function (i.e. it is the gradient of the log-probability at a given time in the diffusion process). Curiously, on the practical side, most studies on diffusion models implement this vector field as a neural network function and do not constrain it be the gradient of some energy function (that is, most studies do not constrain the vector field to be conservative). Even though some studies investigated empirically whether such a constraint will lead to a performance gain, they lead to contradicting results and failed to provide analytical results. Here, we provide three analytical results regarding the extent of the modeling freedom of this vector field. {Firstly, we propose a novel decomposition of vector fields into a conservative component and an orthogonal component which satisfies a given (gauge) freedom. Secondly, from this orthogonal decomposition, we show that exact density estimation and exact sampling is achieved when the conservative component is exactly equals to the true score and therefore conservativity is neither necessary nor sufficient to obtain exact density estimation and exact sampling. Finally, we show that when it comes to inferring local information of the data manifold, constraining the vector field to be conservative is desirable.

  • 2 authors
·
Feb 6, 2024

3D Dynamic Fluid Assets from Single-View Videos with Generative Gaussian Splatting

While the generation of 3D content from single-view images has been extensively studied, the creation of physically consistent 3D dynamic scenes from videos remains in its early stages. We propose a novel framework leveraging generative 3D Gaussian Splatting (3DGS) models to extract and re-simulate 3D dynamic fluid objects from single-view videos using simulation methods. The fluid geometry represented by 3DGS is initially generated and optimized from single-view images, then denoised, densified, and aligned across frames. We estimate the fluid surface velocity using optical flow, propose a mainstream extraction algorithm to refine it. The 3D volumetric velocity field is then derived from the velocity of the fluid's enclosed surface. The velocity field is therewith converted into a divergence-free, grid-based representation, enabling the optimization of simulation parameters through its differentiability across frames. This process outputs simulation-ready fluid assets with physical dynamics closely matching those observed in the source video. Our approach is applicable to various liquid fluids, including inviscid and viscous types, and allows users to edit the output geometry or extend movement durations seamlessly. This automatic method for creating 3D dynamic fluid assets from single-view videos, easily obtainable from the internet, shows great potential for generating large-scale 3D fluid assets at a low cost.

  • 4 authors
·
Oct 29, 2025

The Principles of Diffusion Models

This monograph presents the core principles that have guided the development of diffusion models, tracing their origins and showing how diverse formulations arise from shared mathematical ideas. Diffusion modeling starts by defining a forward process that gradually corrupts data into noise, linking the data distribution to a simple prior through a continuum of intermediate distributions. The goal is to learn a reverse process that transforms noise back into data while recovering the same intermediates. We describe three complementary views. The variational view, inspired by variational autoencoders, sees diffusion as learning to remove noise step by step. The score-based view, rooted in energy-based modeling, learns the gradient of the evolving data distribution, indicating how to nudge samples toward more likely regions. The flow-based view, related to normalizing flows, treats generation as following a smooth path that moves samples from noise to data under a learned velocity field. These perspectives share a common backbone: a time-dependent velocity field whose flow transports a simple prior to the data. Sampling then amounts to solving a differential equation that evolves noise into data along a continuous trajectory. On this foundation, the monograph discusses guidance for controllable generation, efficient numerical solvers, and diffusion-motivated flow-map models that learn direct mappings between arbitrary times. It provides a conceptual and mathematically grounded understanding of diffusion models for readers with basic deep-learning knowledge.

  • 5 authors
·
Oct 23, 2025 3

On the statistical theory of self-gravitating collisionless dark matter flow: Scale and redshift variation of velocity and density distributions

This paper studies the scale and redshift variation of density and velocity distributions in self-gravitating collisionless dark matter flow by a halo-based non-projection approach. All particles are divided into halo and out-of-halo particles for redshift variation of distributions. Without projecting particle fields onto a structured grid, the scale variation is analyzed by identifying all particle pairs on different scales r. We demonstrate that: i) Delaunay tessellation can be used to reconstruct the density field. The density correlation, spectrum, and dispersion functions were obtained, modeled, and compared with the N-body simulation; ii) the velocity distributions are symmetric on both small and large scales and are non-symmetric with a negative skewness on intermediate scales due to the inverse energy cascade at a constant rate varepsilon_u; iii) On small scales, the even order moments of pairwise velocity Delta u_L follow a two-thirds law (-varepsilon_ur)^{2/3}, while the odd order moments follow a linear scaling langle(Delta u_L)^{2n+1}rangle=(2n+1)langle(Delta u_L)^{2n}ranglelangleDelta u_Lrangler; iv) The scale variation of the velocity distributions was studied for longitudinal velocities u_L or u_L^{'}, pairwise velocity (velocity difference) Delta u_L=u_L^{'}-u_L and velocity sum Sigma u_L=u^{'}_L+u_L. Fully developed velocity fields are never Gaussian on any scale, despite that they can initially be Gaussian; v) On small scales, u_L and Sigma u_L can be modeled by a X distribution to maximize the system entropy; vi) On large scales, Delta u_L and Sigma u_L can be modeled by a logistic or a X distribution; vii) the redshift variation of the velocity distributions follows the evolution of the X distribution involving a shape parameter alpha(z) decreasing with time.

  • 1 authors
·
Feb 14, 2022

Verifying the High-Energy Tail in Bi-Kappa Particle Loading: Three-Dimensional Tests, Velocity Bounds, and Finite Precision

The bi-Kappa distribution models anisotropic space-plasma populations with suprathermal power-law tails. Kinetic simulations represent such a population by computational particles, and a loader draws their velocities from the requested bi-Kappa distribution, which we call the target distribution. When κ is close to 1/2, floating-point underflow can remove the largest draws, and a velocity bound changes the loaded distribution. Published Kappa loaders are usually verified by comparing histograms of the speed or of one velocity component with the analytic distribution. Such comparisons do not examine the direction of the velocity or whether the direction is independent of the speed. We build an anisotropic loader on an established Gamma-ratio construction and examine each of these problems. Near κ=1/2, evaluating the Gamma ratio on a logarithmic scale avoids the loss of draws to underflow in single and double precision down to κ=0.5001. When draws outside a bound on each velocity component are discarded and redrawn, a small rejected fraction can accompany a large change in the tail. At κ=2 and θ_parallel=2θ_perp, a bound at 20 times each component's thermal speed rejects a fraction 3.6times10^{-4} of the draws and lowers the 99.9th-percentile speed by 11%. We test the loaded velocities through their direction and their normalized radius, the length of the velocity after each component is divided by sqrtκ times its thermal speed. The tests used nine values of κ from 0.51 to 10, including 1/2<κle3/2, where the second moments do not exist, with θ_parallel=2θ_perp in double precision. At every κ, χ^2 tests find the normalized radius out to its 99.999th percentile, the direction, and their joint distribution consistent with the target distribution.

  • 2 authors
·
Nov 12

On Variance Reduction in Learning Mean Flows

One-step generative modeling has emerged as a leading approach for amortizing the inference cost of diffusion and flow-matching models. Among distillation-free methods, MeanFlow training is notoriously unstable, with non-decreasing loss and unbounded gradient variance. In this work, we establish a theory that attributes this pathology to a misuse of the conditional velocity field. We show that the conditional velocity plays two distinct statistical roles in the loss: both as an unbiased regression target and as a Monte Carlo control variate in a Jacobi-vector product, with the original MeanFlow loss assigning the wrong coefficient to the latter. We derive the optimal coefficient in closed form and show that a family of fixes in concurrent works corresponds to different practical realizations of the same optimum. A controlled sweep of this coefficient on two-dimensional benchmarks and on a latent Diffusion Transformer recovers the predicted bias-variance ordering. Our DiT experiment also reveals a quantitative FID-MSE landscape mismatch. Specifically, although the gradient-MSE is minimized at an interior coefficient value near β!=!0.94, the coefficient that minimizes FID prefers to use conditional velocity directly at the unbiased corner. Our analysis therefore explains why MeanFlow is unstable and unifies its concurrent remedies, and shows that the variance-optimal coefficient need not coincide with the quality-optimal one.

  • 2 authors
·
Jun 29

On the Dynamics of Acceleration in First order Gradient Methods

Ever since the original algorithm by Nesterov (1983), the true nature of the acceleration phenomenon has remained elusive, with various interpretations of why the method is actually faster. The diagnosis of the algorithm through the lens of Ordinary Differential Equations (ODEs) and the corresponding dynamical system formulation to explain the underlying dynamics has a rich history. In the literature, the ODEs that explain algorithms are typically derived by considering the limiting case of the algorithm maps themselves, that is, an ODE formulation follows the development of an algorithm. This obfuscates the underlying higher order principles and thus provides little evidence of the working of the algorithm. Such has been the case with Nesterov algorithm and the various analogies used to describe the acceleration phenomena, viz, momentum associated with the rolling of a Heavy-Ball down a slope, Hessian damping etc. The main focus of our work is to ideate the genesis of the Nesterov algorithm from the viewpoint of dynamical systems leading to demystifying the mathematical rigour behind the algorithm. Instead of reverse engineering ODEs from discrete algorithms, this work explores tools from the recently developed control paradigm titled Passivity and Immersion approach and the Geometric Singular Perturbation theory which are applied to arrive at the formulation of a dynamical system that explains and models the acceleration phenomena. This perspective helps to gain insights into the various terms present and the sequence of steps used in Nesterovs accelerated algorithm for the smooth strongly convex and the convex case. The framework can also be extended to derive the acceleration achieved using the triple momentum method and provides justifications for the non-convergence to the optimal solution in the Heavy-Ball method.

  • 5 authors
·
Sep 22, 2025

Stochastic gradient descent on the epigenetic landscape: a unified framework for cellular plasticity, tumor heterogeneity, and the asymptotic irrelevance of fitness

Phenotypic plasticity, the ability of cells to switch between states, is central to development, differentiation, and therapy resistance. Although it is modeled at several scales, from compartmental ODEs to phenotype-structured PDEs and single-cell stochastic equations, a framework connecting these descriptions is missing. We present such a framework. Starting from a general n-compartment ODE model encompassing nonlinear growth and linear transitions between phenotypes, we show, with a new, elementary and generalizable proof of a recent theorem, that under uniform competition, the long-term population distribution is solely governed by transition rates. All phenotypes become selectively neutral at saturation, and the imprint of fitness differences during growth fades at an explicit rate. Restricting transitions to neighboring states transforms the model into a discretization of a phenotype-structured reaction-diffusion-advection PDE. In this continuum model, diffusion and advection are identified from switching rates, and fitness remains asymptotically irrelevant. Interpreting the advection velocity as the negative gradient of an effective epigenetic potential transforms the PDE into a Fokker--Planck equation and converts single-cell trajectories into stochastic gradient descent (SGD) in the Langevin sense on the phenotypic landscape. Non-local transitions, such as mutations, are incorporated via an integro-differential term, yielding a unified model with reaction, gradient flow, diffusion, and jumps. State-dependent noise reshapes the effective landscape without altering the underlying potential. This gives cancer a route to elevated plasticity that static, single-cell snapshots cannot distinguish from a changed landscape. This framework provides a physical interpretation of Waddington's landscape, where cells perform SGD, and cancer corresponds to a corrupted landscape.

  • 1 authors
·
Sep 28

Are We Really Learning the Score Function? Reinterpreting Diffusion Models Through Wasserstein Gradient Flow Matching

Diffusion models are commonly interpreted as learning the score function, i.e., the gradient of the log-density of noisy data. However, this assumption implies that the target of learning is a conservative vector field, which is not enforced by the neural network architectures used in practice. We present numerical evidence that trained diffusion networks violate both integral and differential constraints required of true score functions, demonstrating that the learned vector fields are not conservative. Despite this, the models perform remarkably well as generative mechanisms. To explain this apparent paradox, we advocate a new theoretical perspective: diffusion training is better understood as flow matching to the velocity field of a Wasserstein Gradient Flow (WGF), rather than as score learning for a reverse-time stochastic differential equation. Under this view, the "probability flow" arises naturally from the WGF framework, eliminating the need to invoke reverse-time SDE theory and clarifying why generative sampling remains successful even when the neural vector field is not a true score. We further show that non-conservative errors from neural approximation do not necessarily harm density transport. Our results advocate for adopting the WGF perspective as a principled, elegant, and theoretically grounded framework for understanding diffusion generative models.

  • 4 authors
·
Aug 29, 2025

FluidLab: A Differentiable Environment for Benchmarking Complex Fluid Manipulation

Humans manipulate various kinds of fluids in their everyday life: creating latte art, scooping floating objects from water, rolling an ice cream cone, etc. Using robots to augment or replace human labors in these daily settings remain as a challenging task due to the multifaceted complexities of fluids. Previous research in robotic fluid manipulation mostly consider fluids governed by an ideal, Newtonian model in simple task settings (e.g., pouring). However, the vast majority of real-world fluid systems manifest their complexities in terms of the fluid's complex material behaviors and multi-component interactions, both of which were well beyond the scope of the current literature. To evaluate robot learning algorithms on understanding and interacting with such complex fluid systems, a comprehensive virtual platform with versatile simulation capabilities and well-established tasks is needed. In this work, we introduce FluidLab, a simulation environment with a diverse set of manipulation tasks involving complex fluid dynamics. These tasks address interactions between solid and fluid as well as among multiple fluids. At the heart of our platform is a fully differentiable physics simulator, FluidEngine, providing GPU-accelerated simulations and gradient calculations for various material types and their couplings. We identify several challenges for fluid manipulation learning by evaluating a set of reinforcement learning and trajectory optimization methods on our platform. To address these challenges, we propose several domain-specific optimization schemes coupled with differentiable physics, which are empirically shown to be effective in tackling optimization problems featured by fluid system's non-convex and non-smooth properties. Furthermore, we demonstrate reasonable sim-to-real transfer by deploying optimized trajectories in real-world settings.

  • 7 authors
·
Mar 4, 2023

First observation of the Josephson-Anderson relation in experiments on hydrodynamic drag

We verify a recent prediction (Eq. 3.50 in G. L. Eyink, Phys. Rev. X 11, 031054 (2021)) for the drag on an object moving through a fluid. In this prediction the velocity field is decomposed into a nonvortical (potential) and vortical contribution, and so is the associated drag force. In the Josephson-Anderson relation the vortical contribution of the drag force follows from the flux of vorticity traversing the streamlines of the corresponding potential flow. The potential component is directly determined by the plate acceleration and its added mass. The Josephson-Anderson relation is derived from the quantum description of superfluids, but remarkably applies to the classical fluid in our experiment. In our experiment a flat plate is accelerated through water using a robotic arm. This geometry is simple enough to allow analytic potential flow streamlines. The monitored plate position shows an oscillatory component of the acceleration, which adds an additional test of the Josephson-Anderson relation. The instantaneous velocity field is measured using particle image velocimetry. It enables us to evaluate Eq. 3.50 from [1] and compare its prediction to the measured drag force. We find excellent agreement, and, most remarkably find that the added mass contribution to the drag force still stands out after the flow has turned vortical. We finally comment on the requirements on the experimental techniques for evaluating the Josephson-Anderson relation.

  • 5 authors
·
Aug 27, 2025

Finite difference method in prolate spheroidal coordinates for freely suspended spheroidal particles in linear flows of viscous and viscoelastic fluids

A finite difference scheme is used to develop a numerical method to solve the flow of an unbounded viscoelastic fluid with zero to moderate inertia around a prolate spheroidal particle. The equations are written in prolate spheroidal coordinates, and the shape of the particle is exactly resolved as one of the coordinate surfaces representing the inner boundary of the computational domain. As the prolate spheroidal grid is naturally clustered near the particle surface, good resolution is obtained in the regions where the gradients of relevant flow variables are most significant. This coordinate system also allows large domain sizes with a reasonable number of mesh points to simulate unbounded fluid around a particle. Changing the aspect ratio of the inner computational boundary enables simulations of different particle shapes ranging from a sphere to a slender fiber. Numerical studies of the latter particle shape allow testing of slender body theories. The mass and momentum equations are solved with a Schur complement approach allowing us to solve the zero inertia case necessary to isolate the viscoelastic effects. The singularities associated with the coordinate system are overcome using L'Hopital's rule. A straightforward imposition of conditions representing a time-varying combination of linear flows on the outer boundary allows us to study various flows with the same computational domain geometry. {For the special but important case of zero fluid and particle inertia we obtain a novel formulation that satisfies the force- and torque-free constraint in an iteration-free manner.} The numerical method is demonstrated for various flows of Newtonian and viscoelastic fluids around spheres and spheroids (including those with large aspect ratio). Good agreement is demonstrated with existing theoretical and numerical results.

  • 2 authors
·
Oct 9, 2023

Dojo: A Differentiable Physics Engine for Robotics

We present Dojo, a differentiable physics engine for robotics that prioritizes stable simulation, accurate contact physics, and differentiability with respect to states, actions, and system parameters. Dojo models hard contact and friction with a nonlinear complementarity problem with second-order cone constraints. We introduce a custom primal-dual interior-point method to solve the second order cone program for stable forward simulation over a broad range of sample rates. We obtain smooth gradient approximations with this solver through the implicit function theorem, giving gradients that are useful for downstream trajectory optimization, policy optimization, and system identification applications. Specifically, we propose to use the central path parameter threshold in the interior point solver as a user-tunable design parameter. A high value gives a smooth approximation to contact dynamics with smooth gradients for optimization and learning, while a low value gives precise simulation rollouts with hard contact. We demonstrate Dojo's differentiability in trajectory optimization, policy learning, and system identification examples. We also benchmark Dojo against MuJoCo, PyBullet, Drake, and Brax on a variety of robot models, and study the stability and simulation quality over a range of sample frequencies and accuracy tolerances. Finally, we evaluate the sim-to-real gap in hardware experiments with a Ufactory xArm 6 robot. Dojo is an open source project implemented in Julia with Python bindings, with code available at https://github.com/dojo-sim/Dojo.jl.

  • 8 authors
·
Mar 1, 2022

Finite-Sample Approximation of Hessian-Guided Perturbed Wasserstein Gradient Flows

Wasserstein gradient flow extends gradient descent to probability measures. Its Hessian-guided perturbed variant (PWGF) adds Gaussian perturbations to escape saddle points in nonconvex problems. We investigate when its approximation by finitely many interacting particles remains accurate over growing time horizons. Our analysis retains the curvature accumulated along the population-driven reference path: negative curvature can amplify approximation errors, while subsequent positive curvature can damp their influence. This captures favorable scenarios in which temporary instability is compatible with accurate tracking over growing horizons. Under regularity assumptions and a prescribed common perturbation schedule, we prove particle and objective-value tracking bounds on a high-probability event for reference paths satisfying explicit conditions on accumulated curvature. To handle state-dependent Gaussian jumps, we construct a population-first coupling that preserves the reference particles' conditional independence and reduces jump errors to covariance comparison. We verify the conditions in a variance-plus-cosine model, where curvature recovery yields a growing-horizon tracking guarantee. We also establish local attraction, transverse descent, and positive second variation in two regions of a regularized matrix-factorization model, motivating a positive-negative-positive curvature pattern.

  • 3 authors
·
Oct 6

Lagrangian PINNs: A causality-conforming solution to failure modes of physics-informed neural networks

Physics-informed neural networks (PINNs) leverage neural-networks to find the solutions of partial differential equation (PDE)-constrained optimization problems with initial conditions and boundary conditions as soft constraints. These soft constraints are often considered to be the sources of the complexity in the training phase of PINNs. Here, we demonstrate that the challenge of training (i) persists even when the boundary conditions are strictly enforced, and (ii) is closely related to the Kolmogorov n-width associated with problems demonstrating transport, convection, traveling waves, or moving fronts. Given this realization, we describe the mechanism underlying the training schemes such as those used in eXtended PINNs (XPINN), curriculum regularization, and sequence-to-sequence learning. For an important category of PDEs, i.e., governed by non-linear convection-diffusion equation, we propose reformulating PINNs on a Lagrangian frame of reference, i.e., LPINNs, as a PDE-informed solution. A parallel architecture with two branches is proposed. One branch solves for the state variables on the characteristics, and the second branch solves for the low-dimensional characteristics curves. The proposed architecture conforms to the causality innate to the convection, and leverages the direction of travel of the information in the domain. Finally, we demonstrate that the loss landscapes of LPINNs are less sensitive to the so-called "complexity" of the problems, compared to those in the traditional PINNs in the Eulerian framework.

  • 3 authors
·
May 5, 2022

Admissible Velocity Propagation : Beyond Quasi-Static Path Planning for High-Dimensional Robots

Path-velocity decomposition is an intuitive yet powerful approach to address the complexity of kinodynamic motion planning. The difficult trajectory planning problem is solved in two separate, simpler, steps: first, find a path in the configuration space that satisfies the geometric constraints (path planning), and second, find a time-parameterization of that path satisfying the kinodynamic constraints. A fundamental requirement is that the path found in the first step should be time-parameterizable. Most existing works fulfill this requirement by enforcing quasi-static constraints in the path planning step, resulting in an important loss in completeness. We propose a method that enables path-velocity decomposition to discover truly dynamic motions, i.e. motions that are not quasi-statically executable. At the heart of the proposed method is a new algorithm -- Admissible Velocity Propagation -- which, given a path and an interval of reachable velocities at the beginning of that path, computes exactly and efficiently the interval of all the velocities the system can reach after traversing the path while respecting the system kinodynamic constraints. Combining this algorithm with usual sampling-based planners then gives rise to a family of new trajectory planners that can appropriately handle kinodynamic constraints while retaining the advantages associated with path-velocity decomposition. We demonstrate the efficiency of the proposed method on some difficult kinodynamic planning problems, where, in particular, quasi-static methods are guaranteed to fail.

  • 4 authors
·
Sep 29, 2016

Diffusing in the Right Space: A Systematic Study of Latent Diffusability

Latent diffusion models leverage visual tokenizers to compress images into latent spaces for efficient generative modeling. However, better reconstruction quality of a tokenizer does not necessarily translate into better generation quality, suggesting that latent representations should be evaluated not only by fidelity but also by their diffusability. Recent studies have proposed diverse explanations for diffusion-friendly latent spaces, including semantic separability, affine equivariance, distribution uniformity, spatial structure, spectral smoothness, and manifold continuity. Yet these properties are often validated on a limited set of tokenizers, leaving it unclear which factors are most predictive of downstream generation quality and whether such conclusions hold beyond the specific settings in which they are introduced. In this work, we conduct a systematic study of latent diffusability by training a large collection of tokenizers with diverse regularization strategies, architectures, and latent configurations, and evaluating them with multiple downstream diffusion backbones. Our analysis identifies several latent properties that consistently correlate with generation quality and exhibit strong generalization across experimental settings. Beyond existing metrics, we introduce Velocity Irreducible Variance (VIV), a measure of velocity ambiguity induced by trajectory crossings. Extensive experiments show that VIV is one of the most stable predictors of generation quality.

  • 5 authors
·
Jun 2

VeCoR -- Velocity Contrastive Regularization for Flow Matching

Flow Matching (FM) has recently emerged as a principled and efficient alternative to diffusion models. Standard FM encourages the learned velocity field to follow a target direction; however, it may accumulate errors along the trajectory and drive samples off the data manifold, leading to perceptual degradation, especially in lightweight or low-step configurations. To enhance stability and generalization, we extend FM into a balanced attract-repel scheme that provides explicit guidance on both "where to go" and "where not to go." To be formal, we propose Velocity Contrastive Regularization (VeCoR), a complementary training scheme for flow-based generative modeling that augments the standard FM objective with contrastive, two-sided supervision. VeCoR not only aligns the predicted velocity with a stable reference direction (positive supervision) but also pushes it away from inconsistent, off-manifold directions (negative supervision). This contrastive formulation transforms FM from a purely attractive, one-sided objective into a two-sided training signal, regularizing trajectory evolution and improving perceptual fidelity across datasets and backbones. On ImageNet-1K 256times256, VeCoR yields 22\% and 35\% relative FID reductions on SiT-XL/2 and REPA-SiT-XL/2 backbones, respectively, and achieves further FID gains (32\% relative) on MS-COCO text-to-image generation, demonstrating consistent improvements in stability, convergence, and image quality, particularly in low-step and lightweight settings. Project page: https://p458732.github.io/VeCoR_Project_Page/

  • 5 authors
·
Nov 24, 2025

Beyond dust in local cosmography: covariant kinetic theory

Modelling cold dark matter as dust makes the matter congruence geodesic and therefore removes any intrinsic dipole from the local Hubble flow. The dust model breaks down as stream crossing develops, whereas a collisionless gas accommodates stream crossing via velocity dispersion in phase space. We develop a covariant kinetic framework for this regime without assuming a background spacetime or any geometrical symmetry. Starting from the exact massive Vlasov hierarchy, we construct its energy-integrated moments and organise these by velocity weight. A self-consistent truncation at the quadrupole closes the dynamics on the matter energy density, isotropic pressure and anisotropic pressure. Their gradients generate a matter-frame 4-acceleration, for which we find an exact nonlinear solution of the momentum constraint, valid in the general case without truncation. This goes beyond previous work in which an arbitrary 4-acceleration is introduced. Velocity dispersion also sources vorticity through the curl of 4-acceleration, and we derive the nonlinear expression for vorticity evolution. We then propagate the non-geodesic matter flow into covariant local cosmography, where the 4-acceleration is the intrinsic Hubble dipole and also enters the deceleration multipoles. Our construction provides a covariant kinetic completion of dust cosmography and identifies the quantities required to test collisionless matter directly with local distance--redshift data. A companion paper specialises the hierarchy to perturbed FLRW spacetime and predicts the size of the resulting cosmographic signals.

  • 2 authors
·
Oct 2

Scaling physics-informed hard constraints with mixture-of-experts

Imposing known physical constraints, such as conservation laws, during neural network training introduces an inductive bias that can improve accuracy, reliability, convergence, and data efficiency for modeling physical dynamics. While such constraints can be softly imposed via loss function penalties, recent advancements in differentiable physics and optimization improve performance by incorporating PDE-constrained optimization as individual layers in neural networks. This enables a stricter adherence to physical constraints. However, imposing hard constraints significantly increases computational and memory costs, especially for complex dynamical systems. This is because it requires solving an optimization problem over a large number of points in a mesh, representing spatial and temporal discretizations, which greatly increases the complexity of the constraint. To address this challenge, we develop a scalable approach to enforce hard physical constraints using Mixture-of-Experts (MoE), which can be used with any neural network architecture. Our approach imposes the constraint over smaller decomposed domains, each of which is solved by an "expert" through differentiable optimization. During training, each expert independently performs a localized backpropagation step by leveraging the implicit function theorem; the independence of each expert allows for parallelization across multiple GPUs. Compared to standard differentiable optimization, our scalable approach achieves greater accuracy in the neural PDE solver setting for predicting the dynamics of challenging non-linear systems. We also improve training stability and require significantly less computation time during both training and inference stages.

  • 3 authors
·
Feb 20, 2024

Enhanced Velocity Field Modeling for Gaussian Video Reconstruction

High-fidelity 3D video reconstruction is essential for enabling real-time rendering of dynamic scenes with realistic motion in virtual and augmented reality (VR/AR). The deformation field paradigm of 3D Gaussian splatting has achieved near-photorealistic results in video reconstruction due to the great representation capability of deep deformation networks. However, in videos with complex motion and significant scale variations, deformation networks often overfit to irregular Gaussian trajectories, leading to suboptimal visual quality. Moreover, the gradient-based densification strategy designed for static scene reconstruction proves inadequate to address the absence of dynamic content. In light of these challenges, we propose a flow-empowered velocity field modeling scheme tailored for Gaussian video reconstruction, dubbed FlowGaussian-VR. It consists of two core components: a velocity field rendering (VFR) pipeline which enables optical flow-based optimization, and a flow-assisted adaptive densification (FAD) strategy that adjusts the number and size of Gaussians in dynamic regions. We validate our model's effectiveness on multi-view dynamic reconstruction and novel view synthesis with multiple real-world datasets containing challenging motion scenarios, demonstrating not only notable visual improvements (over 2.5 dB gain in PSNR) and less blurry artifacts in dynamic textures, but also regularized and trackable per-Gaussian trajectories.

  • 6 authors
·
Jul 30, 2025

MeanFlowNFT: Bringing Forward-Process RL to Average-Velocity Generators

MeanFlow generators achieve fast few-step sampling by predicting average velocities over time intervals, making them attractive for efficient generation. Reinforcement learning (RL) has become a powerful way to align diffusion and flow models with human preferences and task-specific objectives. In particular, DiffusionNFT offers an efficient forward-process RL framework that does not require reverse-process trajectories or likelihood estimation. However, applying such RL methods to MeanFlow remains underexplored. DiffusionNFT optimizes instantaneous velocities, whereas MeanFlow samples with average velocities. To bridge this gap, we introduce MeanFlowNFT. Inspired by the MeanFlow identity, which bridges average and instantaneous velocities, we construct an induced instantaneous-velocity predictor. We apply the DiffusionNFT objective to this predictor, making reward optimization well-defined for MeanFlow. Sampling remains based on the average velocity, preserving MeanFlow's fast few-step generation. We further prove that MeanFlowNFT inherits DiffusionNFT's strict policy-improvement guarantee. Experiments on image and video generation show that MeanFlowNFT consistently improves baselines. Moreover, it outperforms prior state-of-the-art RL-tuned few-step generators on most metrics (6 of 8 on SD3.5-M), and can even surpass multi-step RL-tuned diffusion while using only a few sampling steps. For instance, on Wan 2.1, 4-step MeanFlowNFT reaches a VBench score of 84.33, surpassing 50-step LongCat-Video RL (82.57).